If your TP Link extender is not working anymore, it is incredibly frustrating because you may need to depend on the extender for a stable Wi-Fi connection. Before you assume the TP Link extender is defective, remember that most faults are usually minor problems that are easy to resolve at home.
Check the Power Source
Start with the basics. The extender must be connected to a working power outlet. Examine if the LED lights are glowing. If not, unplug the extender, wait for 10 seconds, and plug it in again, because a faulty socket can make the TP Link extender appear non-functional.
Check Router Connectivity
The router might sometimes be the culprit. The extender cannot broadcast any signals if there is no internet from the router. Check the direct connection from your device to the router. If the main network works fine, then the usual troubleshooting for extenders is pertinent.
Placement
Bad placement is one of the top reasons users find the TP Link extender not working. It should be halfway from the router to the dead zone you want to cover. Avoid having it beyond walls that are thick, basements, or appliances that might dampen Hi-Fi signals.
Change Wi-Fi Credentials
If you recently changed the SSID or password of your router, your TP Link extender will not connect without you manually logging into the TP Link Tether app or portal to update this information. Incorrect credentials can result in the TP Link extender seemingly stopping working.
Firmware and Reset
If the firmware is outdated, that usually indicates an unstable TP-Link extender. You may go to the TP Link extender web panel, navigate to the appropriate section, see if there is an available update, and complete the update. Or, if that doesn't work, you may need to reset the TP Link extender by holding down the reset button for ten seconds before setting it up again.
You may probably fix the problem and have your extension operating normally again by following these steps.
Comments
0 comment